Special purpose Scorpion softshell jacket. Perfect for very difficult weather conditions. Made of a combination of polyester (94%) and elastane (4%), all additionally coated with Teflon. Thanks to this, the material is waterproof at the level of 8000 mm and breathable at 5000 mvp. The lining is made of polyester which is pleasant to the touch. Additional advantages of the fabric are resistance to oils and dirt. The jacket will work well both in wet and sandy areas.
The hood with a visor can be tucked into the collar. Thanks to this, you can quickly take it out and put it on your head in case of rainfall. The hood has an elastic drawstring with a stopper, so you can better fit it to the body. Softshell is fastened with two-way YKK zipper. The jacket has 9 pockets spread over its entire surface: 2 large on the sides with additional smaller ones inside, a large pocket on the back, 2 on the shoulders, internal pockets with a headphone port and 1 additional pocket at the end of the left sleeve.
If necessary, you can adjust the sleeves and the waistband to suit your body shape. Under the armpits there are ventilation panels that are closed with a zipper. On both sleeves you will find hook & loop panels.
Size | Total length (cm/in) | Chest circumference (cm/in) | Sleeve lenght - armpit to cuff (cm/in) |
---|---|---|---|
S | 66 cm (26") | 104 cm (40,9") | 55 cm (21,7") |
M | 69 cm (27,2") | 110 cm (43,3") | 57 cm (22,4") |
L | 72 cm (28,3") | 118 cm (46,5") | 58,5 cm (23") |
XL | 75 cm (29,5") | 124 cm (48,8") | 60 cm (23,6") |
XXL | 77 cm (30,3") | 128 cm (50,4") | 63 cm (24,8") |
3XL | 78 cm (30,7") | 132 cm (52") | 64 cm (25,2") |
INSTRUCTIONS: HOW TO MEASURE
Please read the following instructions to be sure you buy a product that will fit well.
Place a garment that fits you well on a flat, even surface (e.g. table, floor, bed) and take its measurements.
Remember to measure without stretching the material!
1. Total length
Place the garment facing surface and measure the length in a straight line from collar seam to the bottom of the measured item.
2. Chest measurements
Place the back of the garment on the surface and measure the width between the seams in the armpits. Multiply this value twice to get the chest measurements.
3. Sleeve length from armpit
Place the back of the garment on the surface and measure the length from the armpit seam to the end of the sleeve cuff.
What if you are between two sizes? It's easy. If you prefer more fitted clothes, choose a smaller size. If you prefer to be a little looser, go for the larger size.
THE TOLERANCE FOR THE DIMENSIONS GIVEN IN THE TABLE IS +/- 2 CM.
